New UPA USB Programmer V1.2 with Full Adaptors Green Color

upa usb 2012 is the full set with all adapters,The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable. It’s equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.
Device configuration is done over special config keys which make the work convenient and safe compared to wiring up all manually upa usb.
Additional packages can be covered by commonly available Adapters plugged into the 40 pin ZIF socket.
The main Device further includes a 10 pin ISP connector where the included ISP Adapters can be connected using a standard 1:1 flatribbon cable (included). The included PLCC ISP Adapters are to be put directly over the soldered chip of the target device making the work convenient and safe compared to soldering or using clips connecting up all manually. (Power from the UUSP to the ISP target can be enabled or disabled by a jumper next to the 10 pin ISP connector)

Config Keys: (For Device configuration)
1 x I2C & SPI Config Key
1 x Microwire Config Key
1 x Microwire Rotated Config Key
1 x Microwire 93(C)S   8 pin Config Key
1 x Microwire 93(C)S 14 pin Config Key
1 x M35080 Config Key
1 x SDA(E)2506 Config Key

PLCC52 ISP Adapters:
1 x CR16MES & CR16MFS ISP Adapter
1 x MC68HC05B ISP Adapter
1 x MC68HC08AS20 ISP Adapter
1 x MC68HC705B16 ISP Adapter
1 x MC68HC11A8/E9 ISP Adapter
1 x MC68HC05H12 ISP Adapter
1 x MC68HC11EA9 ISP Adapter

PLCC68 ISP Adapters:
1 x MC68HC11F1 ISP Adapter
1 x MC68HC11KA2/4 & MC68HC11KS ISP Adapter
1 x MC68HC11L6 ISP Adapter

PLCC84 ISP Adapters:
1 x MC68HC11P2 & MC68HC11PH8 ISP Adapter
1 x MC68HC11K ISP Adapter
1 x DIL to 10pin Flat-ribbon header (For using IC clips or clamps)
1 x Flat-ribbon cable 10pin

Ford VCMII V86 VS FORD VCM2 V91

VCM 2Recently ,so many customer ask us about VCM 2 difference and 

how to install FORD VCM V91,we will answer you all here:

1 Ford vcm 2 v86 (sp177) and Ford vcm v91(SP177-c),All is for Ford car ecu program till 2013 or 2014,they has same function,but Ford vcm 91 has newer car list.

2 For wifi,SP177 don’t have or support WIFI,while SP177-C support WIFI,it need you have WIFI card youself.

3 For installtion,SP177 is much easy and low computer request,so if you don’t remind version,we advise you choose SP177 V86.They both need XP system computer to install.

Next ,we talk about How to install FORD VCM2 V91

V91 has high request on computer

1 first,you need find one XP system computer which never install any ford vcm before.

if you install on these computer,it will expired after 3 days.we have solution for this,we have a frozen software ,but once you install this software,your computer never install with other software more.

2 after you install frozen software,it will also tell you expired,just change the computer time to 3 days before,it can be used again

What should be done before and during install and using Ford VCM II?

Some obd2 tools required a lot on its installation, during installation and as well as when using it. And Ford VCM II is one of them. Following I want to share with you what should be done before installation and what should be noticed during installation and using it.

First, before you start your installation of  VCM 2, you should prepare a specific computer with operating system: WINDOWS XP SP3, and disable antivirus software and firewall of windows. If you want to install Ford-IDS and JLR software in one computer, remember to install them in separate disks, JLR to C:\default path first and then install IDS to any other disk. No connection when you install software. If you have former version of Ford VCM II, youd better uninstall it. In addition, the computer should be only for Ford VCM II rather any other usage.

Second, there are two points you should notice during installation. One is not connecting to internet when you are installing; the other one is if it pops up to install the components, please click yes.

Finally, you may encounter the following question during using: restart computer after finishing the software installation, check the VCM 2 connection between car and computer if the first time connection failed, check computer has no other software installed and the antivirus &
Firewalls are in disable status if the device could not communication with car some day but it worked before. To sum up, it is necessary to have a conclusion of installation and using of Ford VCM II.

It is a bargain! Best Quality Ford VCM II on sale

Sometimes it pays to wait. OBDexpress has discounted the Best Quality VCM 2 IOEM Diagnostic Tool IDS V84 months after the tool launched worldwide. All OBDexpress members will get 20% off the original price at only €282.00!

The Ford VCM II is the latest Ford OEM diagnostic tool. It can work on a wide range of Ford models with standard OBD II. It ensures dealer-level diagnostics by using the IDS software. With this VCM 2, you can diagnose car problems, read and clear Diagnostic Trouble Codes, find guided fault, bleed brakes, program new keys and ECU, etc.

The product supports multiple languages such as Spanish, English, reece, erman, anmark, Chinese, American English, Vietnam, Turkey, Thailand, Swedish, Russian, Portuguese, Japanese, Italy, French and French.

How to solve “Selection not available” for Mazda VCM II or Ford VCM 2?

VCM 2 is the professionl Mazda diagnostic tool. Which can be used to diagnose mazda vehicle for all series after 1996 to latest.

Latest software is V88. Software is updated via CD.

Multi-language: English, Spanish, Portuguese, Poland, Spanish(Mexico), French, French(Canada), Italy, German, Greece, Finland, Slovenia, Danmark ,Czechic, Chinese(Taiwan), Chinese(China), Amer English, Vietnam, Turkey, Thailand, Swedish, Russian, Portuguese(Brazil), Norwegian, Holand, Korea, Japanese, Indian, Hungary

Recent days, one of our customer use it to connected with ex. mazda rx8 2006 1.3HP or Mazda 3 BK 2.0 Diesel DPF 2007, meet prompt “Selection not available” information while diagnose. Here is the detailed photo to show this problem.

Your problem is one program of software is destroyed for unknow reason. Maybe anti-virus software or other software that is not compatible with this mazda software.
Solution: Close or uninstall the unti-virus software, then run this VCM 2, then your problem will be solved. If your machine is Ford, then run the Ford one. If your machine is mazda VCM II, then run the mazda one.

Volvo Vida Dice 2013D setup and diagnostic

Volvo dice engineer tell you how to setup Volvo dice and use it to diagnose.

Volvo Vida Dice 2013D Computer requirement

Windows 7 professional 64-bit operating system

Processor: more than CPU 2.0 GHz

Installed memory (RAM):  at least 4GB

Local disk (C:) require: 40GB free space and file system NTFS format

Internet Explorer 8

Software must install on C://

Step 1. Install Vida 2013D

Open DVD

Copy “Volvo vida 2013D tested patch” to the desktop

Select Install – DVD – Vida dvdheader- Main – setup

If the window pops out a notice “Do you want to allow the following program from an unknown publisher to make changes to this computer?” Click Yes

VIDA 2013D will setup by itself, it will take you some time, please wait patiently!

Choose “Volvo dice All-in-one” to install

Choose language

Choose Destination Folder: C:\VIDA\.  Click Next

Accept License Agreement

Framework 35 and security will be installed automatically

Vida InstallShield Wizard setup automatically, please wait patiently until it is completed.

Vida Configurator for internet, click Save is Okay.

Vida is configuring your new software installation, it will take 20-30 minutes.

After finish, you can see these icons on the desktop: Adobe Reader 8, VIDA all-in-one, Vida on web, Vida admin and Vida configurator.

InstallShield Wizard Complete, select “No, I will restart my computer later”, then click “Finish”. I need to install the patch firstly, and then restart the computer.

Step 2. Install Vida patch

Unzip “Volvo VIDA 2013d tested patch” and open it

Click Install (Note: default Destination Folder is C:\ , don’t change it)

A windows pops up reading “Do you want to allow the following program from an unkown publisher to make changes to this computer?”, click “Yes”

If firewall blocks the program, click “Allow access”

Patch will install by itself

Step 3.Driver software Installation

Connect Vida dice adapter to the computer

A dialogue pops up reading “Installing device driver software”

Click it, it will install driver software, until you see DiCE-206751@0000000000 ready to use, click close.

Find the driver name DiCE-206751@0000000000 in the device manager:

Computer-management-computer management-device Manager, find out DiCE Hardware-DiCE-206751@0000000000

If the driver name is incorrect, there are 3 possible reasons.

1)       Software serial number is incorrect

2)       System Language problem, better use English System.

3)       The device is broken.

Step 4. Restart the computer

Wait the interface icon at the lower right corner turn to green, then launch “VIDA all-in-one”, if this icon is yellow or red, please wait patiently. (This is very important)

Step 5. Check vehicle information and diagnostics for after sales

Click “VIDA all-in-one” and open it

An IE browser will launch

Enter username “1″ and click Login, it needs not to register

(Note: you can’t input the username if you don’t install the patch and restart the computer.)

Select DEFINE VEHICLE PROFILE
Click DICE CONFIGURATION- Test communication tool, then Click Run to self-test, click “Close”

Click “Read Vehicle”
Wait until all vehicle information read out, if some information can’t read out automatically, choose them manually and click ok, otherwise, the “Diagnostics” icon is gray.

Click “Diagnostics”, it will verify VIN and control modules automatically.

Click “FAULT TRACE” to search all ECU, Volvo car is safe, so it has many ECU.

Click “Network” to see the diagram of ECU, the car I are testing only has these ECU, some cars even have more ECU.
Only CEM (Central Electronic module) can be communicated normally can other ECU be identified. If CEM has problem or the diagnostic interface is changed, our VIDA DICE cannot diagnose this car.

New released super Volvo Dice Pro plus

Volvo dice is the newest Volvo car scanner which is used together with Volvo dice all-in-one to communicate with the vehicle.
Communication makes diagnosing and troubleshooting the vehicle possible, as well as downloading software.

In order to facilitate the maintenance convenience, when the car DiCE Pro provides a holster and handle, can effectively protect the equipment, the user can be hung on the equipment or his belt. In equipment positive four lamp, it will tell whether good user equipment work in equipment, the operating instructions on the tools back.

Super Volvo Dice Pro+ Supported Protocol:
The volvo cars has a lot of protocol,such as K-Line,CanBus,Signle CanBus,Manufacture K+Double CanBus and K+Signle CanBus.These protocols is improved in the auto delopment. DiCE Pro support all protocol of Volvo.

Super Volvo dice Pro+ Features:
1. VOLVO Dice Pro is assigned Volvo OEM scanner,It provid orignal trouble diagnostic, orignal work information system , DiCE Pro selftest , DiCE Pro automatic upgread by newer software version and alone SQL Server database.
2. VOLVO Dice Pro has all set function to support workshop,It can do volvo cars from 1996 to now.(according VIDA version)
3. Volvo dice Pro automatic scan the veichle infomation by itself ,example Vin number / Engine Num / AT Number…..
4. VOLVO Dice Pro can do read DTC,How to repair DTC,Read Datastream,Actuation,Programming/coding.

2014 volvo vida dice 2013D newest version update

Buy it for 4 reasons:
1 VOLVO vida dice is Best tool for Volvo car from 1999-2013.It can not do truck,if you want to do Volvo truck,you can check Volvo dice
2 Newest version: 2013D
3 Update via CD
4 Multi-Language: English, Spanish, French, Portuguese, Swedish

This version doesn’t have bluetooth function!
VOLVO has high request on installation computer:

System :WIN 7 PRO
browser:IE8
CPU: above 2.0
Memory: 2GB

Install: You should install it on Volvo dice and should have 80GB+ to install the vida software.
The format should be NPFS

2 Run the Volvo dice,  install it to

3 After restarted, once the service icon(The bottom of the right corner) is available(VIDA Status:  Running) , and choose the below cracked executing documents [VIDA_patch.EXE], install it to

Creator C110 BMW Code Reader V3.3 BMW Code Scanner

Creator C110 BMW Code Reader V3.3 supports BMW between 2000 to 2008 years. function inculde read trouble codes, clear trouble codes, displays live data stream, component testing, clear adapation and vehicle infromation. Add MINI Cooper test function.

Creator C110 Supported car model:

Supports BMW 1 Series, 3 Series, 5 Series, 6 Series, 7 series, 8 series, X series, Z series and Mini

Creator C110 BMW Function:

Read trouble codes, clear trouble codes, displays live data stream, Component Testing, Clear adaptation and vehicle version information

Creator C110 BMW is a good code scanner for BMW car models.And it is free shipping to worldwide countried,with newest V3.3 version,English Germany language is available.

How to Update Creator C110 BMW Code Reader V3.5?

Creator C110 BMW Code Reader V3.5 supports BMW between 2000 to 2008 years. function inculde read trouble codes, clear trouble codes, displays live data stream, component testing, clear adapation and vehicle infromation. Add MINI Cooper test function.

1. Creator C110 BMW Function:
Read trouble codes, clear trouble codes, displays live data stream, Component Testing, Clear adaptation and vehicle version information.

2.How to update Creator C110 BMW?
If you buy the bmw creadtor c110 from our website,please  contact with us,we will send you ‘C110-sc92 BMW_CREATOR_V3.5_EN-update-file’ this file.But as a friendly reminder,before 2000 serial number can not,please check about the SN number.

Troubleshooting 2011 BMW 520Li no-start problem

Early this week, my friend Jim brought his 2011 BMW 20Li to my garage because the car engine could not start. Jim told me he did not drive the car often, and it was with 15,500 mile on it only.

When I used Creator C110 BMW scanner to troubleshoot, I did not get any trouble code, and the car could be started smoothly. I went a test drive, and the car ran very well and no warning light on the dashboard came on. However, when I connected the BMW scanner to ISID module, I detected that the current in fuel pump was too high. Then I reprogrammed the car in order to solve the problem.

Jim came to take the car the next day, but called me that the car could not start again two years later.

Again, I used Creator C110 BMW to troubleshoot the vehicle, and found it was the same problem. I asked Jim how often the car stopped. “My 520Li usually came to a halt about 1 to 2 hours of driving. Then I could not restart it after the halt, no matter how hard I tried.”

I suggested Jim to change a new fuel pump, he did, and the problem never came back then.

How to use V3.6 Creator C110 BMW Code Reader?

Creator C110 BMW is a cost-effective and high performance code reader for BMW vehicles which has released to the latest version V3.6. Then how to use C110 scan tool to erase fault code?

Step 1 Insert BMW car key into the ignition socket. But do not start the vehicle or switch on the electrical system. Leave the key for later use.

Step 2 Connect the Creator C110 BMW main interface to the BMW obd2 diagnostic socket beneath the dashboard and steering the column.

Step 3 After well connected it with vehicle, turn on the C110 ignition switch.

Step 4 Turn BMW key in the switch. Operate following by the C110 screen instruction and then come t. C110 start to detect vehicle ECUs.

Step 5 The fault code will displayed on the C110 screen. Select clear error code button. If a note reading “Fault codes is erased” means the error code has been successfully cleared.

Step 6 If the error code did not be cleared, then take a note of the error code on paper.

Step 7 Make inquiries for the fault code by asking experts, search engine or mechanic etc. After figure out what the fault code related to and find out solution for the problem.

Here is the video guide:

How to use Creator C110 code reader

Top 3 BMW diagnostic tool for DIYers

With the technology development in recent decads, it is easy for every car owner to be a mechanic today. While taking you car for regualr maintenance is important, perhaps even more crucial is buying it a solid scanner for weekly check. Here we have listed 3 best BMW diagnostic tools for DIY use.

1. Creator C110 BMW

Creator C110 V3.3 BMW code reader can work on BMW built between 2000 and 2008, as well as most MINI Cooper vehicles.

Creator C110 BMW function:

Read trouble codes
Clear trouble codes
Displays live data stream
Component Testing
graph display
Clear adaptation
Vehicle version information

2. Creator C110 BMW

iOBD2 BMW works together with iPhone or iPad which is IOS system, to diagnose all BMW car models and entire auto system via bluetooth.

iOBD2 BMW function:

1. Support BMW car model all system diagnose, including Engine, ABS, Airbag, Transmission and so on.
2. Support OBDII/EOBD protocols car diagnose.
3. Support SI-Reset.
4. Record car data like engine speed, ignition time, fuel correction, fuel consumption, coolant temperature
5. EVAP System Test: The purpose of this service is to enable the external test equipment to control the operation of an on-board system, test or component.
6. Read vehicle info: Read vehicle info such as Vehicle Identification Number(VIN), Calibration IDs(CALID) and Calibration Verification Number (CVN).
7. Sensor test: This service is to allow access to the on-board oxygen sensor monitoring test results. The same information may be obtained by the use of [Mode 6 test].
8. Mode 6 test: This service is to allow access to the results for on-board diagnostic monitoring tests of specific components/systems that are not continuously monitored. Examples are catalyst monitoring and the evaporative system monitoring.
9. Emissions Testing: Read and clear diagnostic trouble codes. IM Readiness status

3. BMW INPA/Ediabas K+DCAN USB Interface

Price: US$24.99

BMW INPA/Ediabas K+DCAN Interface USB OBD2 Scanner is a cheap OBD2-to-USB interface for BMW cars. It supports diagnosing BMW cars made from 1998 to 2008.

BMW INPA/Ediabas K+DCAN USB Interface function:
1.read and delete errors
2.adaptations
3.driver programming
4.applu coding and others.

Clear Trouble Codes for BMW 335xi with Creator C110

Several days ago, I got a gift from my dad on my birthday party. It is a Creator C110 BMW code reader, while this code reader cannot arouse my interest. He said, “You will need it someday”. Exactly, thing went as what he had said before.

That evening, I had to attend a lunch with a foreign client to talk about the contract. As usual, I drove my BMW 335xi 2008, suddenly the check engine light is warning. With the appointed time gradually approaching, I felt somewhat restless. So I had no choice but to consult with my dad who is pretty reliable in this aspect.

First he boasted his foresight, and then told me that he had put the Creator C110 BMW on car box. According to what he taught via phone, I connected the USB cable with car interface, and then operated as shown on the screen. It only took several minutes to finish the whole process. My car finally resumed normal startup.

I was somewhat unforgettable to thing happened today, as dad said, do precautions well to prevent some emergency happened beyond your control. It is really an experience! As a car owner, I felt necessary to know some basic auto tools. And after that, “car tool talk” with dad has gradually become the main small talk in my daily life.

At the same time, I know more about Creator C110 BMW , such as Autel AutoLink AL539, Honda Creator C330 and Creator C310 BWM Multi System etc.

bmw Creator C330 Software update

Have you equipped with a reliable Creator C110 BMW for your Honda and Acura. If not, you may be more interested in Honda Creator C330 that I am about to introduce. It is hand-held and easy to operate with powerful functions and wide car coverage.

Creator C110 BMW can be used to read and clear trouble codes, display live data stream and graph display and ECU ID. It covers multiple systems, such as engine, transmission, ABS, SRS, Body, EPS and immobilizer etc. On the other hand, C330 supports Honda and Acura vehicles for OBDII sockets, including ACCORD, ASCOT, CAPA, CIVIC, CR-V, CR-X and more.

Then before using, there is a more important thing that you need to be familiar with the update process. And here, I’d like to share with you about software update.

Software Update ( 4 Steps)

1. Setup update tool

Put the CD into the CD driver, and then you can find the setup file in the CD

Click the “setup file” to setup the tool, and to finish it.

2. Run the update tool

Click the update tool icon and run it (followed pictures and steps below)

(1) Use the USB Cable connect to C330 scanner and PC
(2) Run the update software

(1) Click “update”. Then the select window will appear

(2) Change the path to find the update file (HONDA_CREATOR_XXXXXX.BIN)
(3) Select update file and click “open”
(4) Enter into upgrade interface; wait for the end of upgrade.
WARNNING:
DO not powerful off during update.
DO not Plug or Unplug USB tools during upgrade.

3. Start update

Waiting for a few minutes, the software will update the scanner tool.

4. Finish update

When the update is finished, the screen on PC will show as below.

If update succeeds, the software will display “Update success”, if not, it will display”Update fail! Try again”.
Press “finish”, the scanner is already updated, and you can unplug the scanner from PC.

BMW diagnostic tools you keep handy

Today, all contemporary BMW models use a variety of diagnostic systems. Accessing all of them requires specialized hardware. So, as we said, BMWs are high performance vehicles that require specialized care.

Regular maintenance of your BMW car is important for two reasons:
1. A well-maintained car will last longer and run better.
2. a poorly maintained car is a danger to the driver and everyone around him or her.

In a word, performing carecul and diligent maintenance will ensure that you are always riding as safely as possible on a car that is performing to its maximum capabilities. You do not need an entire mechanic’s shop worth of tools to service your car, but there are a few diagnostic tools you should keep handy.

BMW ICOM Server ISIS+ISPS+ISID+ICOM
The Creator C110 BMW is most poweful tool for BMW. It can do some function as original factory, support online programming. It is also very expensive and difficult to get. But absolutely it worth.

Creator C110 BMW code reader V1.1
The Creator C110 BMW function inculding read trouble codes, clear trouble codes, displays live data stream, component testing, clear adapation and vehicle infromation. However, it supports BMW between 2000 to 2008 years. And it adds MINI cooper test function.

B800 BMW Airbag Scan/Reset Tool
This Creator C110 BMW supports for most BMWs built between 1994 and 2003. It displays all SRS fault codes, tells you what’s wrong and resets the “SRS” Light.